Home > Products > Compression Gasket Sheet Materials > PTFE Sheets > PTFE Gasket Sheet with Silica Filler
PTFE Gasket Sheet with Silica Filler

PTFE Gasket Sheet with Silica Filler

For SULON 2200 PTFE gasket sheet with silica filler, we have large quantity 1.5 mm and 3 mm thickness in stock. Any your need please contact us.

PDF DownLoad

Content

PTFE Gasket Sheet with Silica Filler - SULON 2200

SULON 2200 PTFE gasket sheet with silica filler is usually a outstanding performance biaxially orientated PTFE sheet sealing substance with silica filler and has now standard fantastic compressibility. It is a general purpose grade for sealing purposes all over the complete pH 0 to 14 range and excellent for using in programs with sturdy acids except hydrofluoric to general chemicals. This material could also be used for all levels of sulfuric acid. It is really not intended for molten alkali metals, fluorine gas or hydrogen fluoride. The PTFE gasket sheet with silica filler is WRAS approved for hot and cold potable water solutions. This PTFE compound gasket sheet that contains silica, as well as fawn in color.

PTFE gasket sheet with silica filler normal thickness is 1.5 mm and 3 mm, and this kind of PTFE gasket sheets is excellent for dealing with as well as cutting. And our SULON 2200 is equal to Garlock GYLON® Style 3500 PTFE with Silica Filler Gasketing, Sigma 511 silica filler PTFE Gasket sheet.


PTFE Gasket Sheet with Silica Filler


Advantages:

• Special making process decreases the cold flow problems of typical of skived and expanded PTFE sheets
• Withstands a wide range of chemicals for extended service life in lots of applications
• Provides a number of the largest sheet sizes in the industry
• Improved material utilization decreases waste
• Improved effectiveness over standard PTFE
• Minimized product loss and also emissions
• Reduced creep relaxation

Applications:

PTFE gasket sheet with silica filler can be used for gas and hydrogen fluoride, solvents, hydrocarbons, water, steam, chlorine and cryogenics. As well as it is authorized for potable water service, complies with requirements of FDA policies and can be utilised at all concentrations of sulfuric acid.

Properties

Testing Items Testing Method Results
Tensile Strength ASTM F152 15 Mpa
Compression ASTM F36 7%
Recovery ASTM F36 42%
Creep Relaxation ASTM F38 22%
Liquid Leakage ASTM F37 0.2 ml/hr
Density - 2.2 g/cm3


Operating Limitation

Minimum Temperature: -450°F (-268°C)
Maximum Temperature: 500°F (260°C)
Maximum Pressure: 1235 psi (8.5 MPa)