Home
>
Products > High Performance Plastics > PTFE Tubes > 15% Carbon Fiber Filled PTFE Compound Tubes
Products
- Flange Insulation Gasket Kits
- Industrial Sealing Gaskets
- Compression Gasket Sheet Materials
- Compression Gland Packing
- Rubber Gaskets and O-rings
- Rubber Gasket Sheeting
- High Performance Plastics
- Expanded PTFE Products
- Sealing Machine Equipment
- Sealing Hand Tools
- Sealing Raw Materials
- Refractory Insulation Materials
15% Carbon Fiber Filled PTFE Compound Tubes
Any time you need 15% Carbon Fiber Filled PTFE Compound Tubes, please contact us. As we stocks many sizes tube in stocks, can send you the tubes you need in a short delivery time.
Content
Style CF15 - 15% Carbon Fiber with PTFE Tube
15% carbon fiber filled PTFE compound tubes are the top rated PTFE materials, which is in a combination of PTFE virgin, 15% carbon fillers as well as additives. The colour is black colored with a solidity of 60 shore D. They have fantastic dry working properties and is intended for seals in compressors or lip seals. Remarkable wear life over traditional carbon levels. Instances of programs: Seal rings, piston rings and also compressor ring.Beside 15% carbon fiber filled PTFE compound, we also have other 3 mian types of carbon fiber filled PTFE
Style CF10- 10% carbon fiber filled PTFE compound tube
Style CF20- 20% carbon fiber filled PTFE compound tube
Style CF25- 25% carbon fiber filled PTFE compound tube
Why We Use Carbon Fiber Filled with PTFE?
Carbon fiber not like carbon powder, this is a very much expensive materials and also owns superior results. carbon fiber minimizes creep as well as improve flex as well as compressive modulus. It raises hardness attributes and exhibits wear attributes in liquid purposes. It is often your best option in automotive applications for instance shock absorber as well as water pumps. It is an superb product to be used in piston rings, bearings and thrust washers.10%, 15%, 20% or 25% carbon fiber filled PTFE compound tubes can be regularly used in various professional pumping systems, pipeline and control device. Its purpose is to reduce run, drip, drip, boost output surroundings, the protection for workers' wellness, safety in production and also reduce the break-down repairs and maintenance range of times.
At past a variety of sealing materials, chopped carbon fiber or carbon fiber filament cloth filled with PTFE sealing materials are usually put on to improve the existing shortcoming of plastic materials, rubber, asbestos fibers materials. The heat conductance of carbon fiber is better than asbestos fibers and standard synthon, when it is employed for dynamic seal, since the temperature go up of carbon fiber filled PTFE compound material is small, in so doing can prolong the working life of material. The temperature tolerance of carbon fiber as well as chemical reagent protected performance are usually more effective than typical filled materials, and frictional coefficient is actually very little, consequently is often used under bigger temperatures for the many chemical reagent. In addition to these kinds of PTFE compound with smaller abrasion volume, thus working life are than very long two to ten times or longer of normal sealing material.
In a short, 10%, 15%, 20% or 25% carbon fiber or other specific filled percentages with PTFE are an amazing decision.
15% Carbon Fiber Filled PTFE Tube Physical Properties
|
Properties |
Test Methods |
Test Results |
Test Unit |
| Density |
ASTM D795 |
2.13 |
g/cm3 |
| Hardness shore D | ASTM D2240 | 58 |
shore D |
| Tensile strength | ASTM D4894 | 22 | mpa |
| Elongation at break 23°C |
ASTM D4894 |
255 |
% |
| Coefficient of Friction, Static | ASTM D1894 | 0.02 |
- |