Products
- Flange Insulation Gasket Kits
- Industrial Sealing Gaskets
- Compression Gasket Sheet Materials
- Compression Gland Packing
- Rubber Gaskets and O-rings
- Rubber Gasket Sheeting
- High Performance Plastics
- Expanded PTFE Products
- Sealing Machine Equipment
- Sealing Hand Tools
- Sealing Raw Materials
- Refractory Insulation Materials
Mylar Isolating Sleeve
We can offer you the quality Mylar sleeve tube at Factory price. All range of ID we can make, and the wall thickness can be 0.03mm to 1mm
Content
Welcome to Know about Mylar isolating Sleeve
Mylar isolating sleeve is used to insulate or isolate bolts from dissimilar metal flanges to avoid galvanic corrosion. Mylar has excellent dielectric strength and low water absorbtion.Mylar Sleeves are designed to fit easily over the flange bolts, and may be used with standard size bolts and bolt holes even with some misalignment. Insulating sleeves have a standard wall thickness and are generally used with separate insulating washers such as G10/G11 Glass Epoxy or phenolic.
Mylar Sleeve is the most recognised and industry approved sleeve and bolt insulating material.
We recommend Mylar Sleeve as it is stronger than Phenolic and less prone to cracking when being torqued or becoming broken during the installation process.
Advantages
Mylar isolating sleeve has a dielectric strength far exceeding other shrinkable materials. It is extremely tough and forms an excellent mechanical barrier. It can be used at both low and high temperatures. It is moisture & vapor resistant and is unaffected by oils, greases, and volatile aromatics.Mylar isolating sleeve Specification
Length: We offer 2m per pcInside Diameter: 0.66mm to 70mm
Wall Thickness: 0.03mm to 1mm
Color: Transparent, color, stripe for Mylar tubings
Data Sheet
| Testing Item | Testing Method | Testing Unit | Testing Result |
| Density | ASTM D1505 | g/cm3 | 1.39 |
|
Water Absorption, 24 hrs |
ASTM D570 | % | 0.75 |
|
Tensile Strength |
ASTM D882 | psi | 28000 |
|
Max operating temp |
- | oC | 149 |