Home
>
Products > Compression Gland Packing > PTFE Braided Gland Packing > Graphite PTFE Packing with Hollow Silicone Rubber Core
Products
- Flange Insulation Gasket Kits
- Industrial Sealing Gaskets
- Compression Gasket Sheet Materials
- Compression Gland Packing
- Rubber Gaskets and O-rings
- Rubber Gasket Sheeting
- High Performance Plastics
- Expanded PTFE Products
- Sealing Machine Equipment
- Sealing Hand Tools
- Sealing Raw Materials
- Refractory Insulation Materials
Graphite PTFE Packing with Hollow Silicone Rubber Core
Graphite PTFE Packing with Hollow Silicone Rubber Core is specifically designed to seal large rotating equipment like mixers and agitators
Content
Graphite PTFE Packing with Hollow Silicone Rubber Core - Style 2045
Graphite PTFE packing with hollow silicone rubber core is made from graphited PTFE Yarn and then with a core of specific grade hollow silicone rubber core, the silicone rubber core offers a combination of the highest chemical resistance and temperature ability and allows the packing to continually seal on pumps that are less than perfect mechanical condition. The outside braided yarn is a combination of graphite fluorocarbon and oil to promote the maximum sealing and wear resistance. This graphite PTFE packing with hollow silicone rubber core was especially designed for pumps where there is an axial or elliptical shaft run out.Application of Graphite PTFE Packing with Hollow Silicone Rubber Core
Graphite PTFE packing with hollow silicone rubber is specifically designed to seal large rotating equipment like mixers and agitators. Testing has proven that a high quality braided packing with a silicone rubber core will outlast conventional packing in applications associated with excessive shaft deflection on large shafts. And graphite PTFE packing with hollow silicone rubber is used for pumps where there is an axial or elliptical shaft run out. Seals on pumps with less than perfect mechanical conditions. High pressure valve packing, worn pumps, or deflecting shafts. Valves, centrifugal pumps, rotary pumps, reciprocating pumps. Especially designed for large rotating equipment like mixers and agitatorsData Sheet
| Temperature | - | Pressure Limit | - |
| Min Temp | - 150 °C | Static | 150 bar |
| Max Temp |
280 °C |
Rotating | 25 bar |
| Density | 1.55 g/cm3 |
Reciprocating |
100 bar |
| Rotary Pump Speed | 19 m/s | Ph Value | 0 - 14 |
Related Category
Carbon Fiber Gland Packing
Flexible Graphite Packings
PTFE Braided Gland Packing
Aramid Fiber Gland Packing
Synthetic Fiber Packing
Cotton, Flax and Ramie Packing
Glass, Ceramic and Asbestos Packing
Injectable Sealant Packing for Pumps
Graphite Die Formed Ring
Related Products