GFO Equivalent PTFE Graphite Braided Packing
GFO Equivalent PTFE Graphite Braided Packing is recommended for pump shaft, and can also be used for agitators, mixers, autoclaves and centrifugal pumps for water, steam, solvents and other media.
Content
GFO Equivalent PTFE Graphite Braided Packing - Style 2035
GFO equivalent PTFE graphite braided packing is braided with China GFO PTFE graphite yarn according to the manufacturing process of GFO braided gland packing. GFO equivalent PTFE graphite braided packing has strong tensile strength and high thermal conductivity, and the low coefficient makes it stable and long-life. It is recommended for pump shaft, and can also be used for agitators, mixers, autoclaves and centrifugal pumps for water, steam, solvents and other media. And typical applications are valves and pumps handling aggressive chemical media in the petrochemical, pulp and paper, power generation and metallurgical sectors - as well as potable water, and steam at up to 260°C
Advantages of GFO Equivalent PTFE Graphite Braided Packing
GFO equivalent PTFE graphite braided packing has extended service life - by up to 400% in harsh environments, and it is well proven with aggressive media and high thermal conductivity for cool running. GFO equivalent PTFE graphite braided packing owns Low coefficient of friction and minimal shaft wear, very good start-up and emergency running characteristics and it is non-hardening.
Data Sheet of GFO Equivalent PTFE Graphite Packing
Temperature
|
-
|
Pressure Limit
|
-
|
Min Temp
|
- 150 °C
|
Static
|
150 bar
|
Max Temp
|
280 °C
|
Rotating
|
20 bar
|
Density
|
1.55 g/cm3
|
Reciprocating
|
100 bar
|
Rotary Pump Speed
|
16 m/s
|
Ph Value
|
0 - 14
|
Why USE GFO Fiber Packing?
GFO Fiber Packing Is Easy To Install
No grease, no mess. Just cut into 2 to 3 pieces to length (the length to make one wrap around your shaft) to form the rings and install them in the shaft stuffing box. Make maybe one adjustment to the packing gland following a short run-in and never tinker with the stuffing box again! You will rarely need to make any adjustments, and the Gore dripless packing will last for years.
GFO Fiber Packing Does Not Damage Shafts
GFO fiber packing has minimal thermal expansion and high abrasion resistance – it never gets hard and abrasive, even when mud or sand-laden water gets into the prop shaft stuffing box. So extensive shaft scoring and premature packing failure are things of the past. And, this marine shaft packing can withstand high shaft speeds without being consumed or destroyed.
GFO Fiber Packing Allows Bilges To Stay Dry
Since GFO fiber dripless packing is four times more thermally conductive than flax, it needs virtually no sea water for lubrication or cooling. And, because it does not swell or shrink, leakage is controlled and kept to an absolute minimum. In fact, you will notice that your bilge is dry and cleaner, because this remarkable packing gland hardly ever drips. It is so conformable and flexible that it will solve most perpetual problem leakers, too.
Related Category
Related Products