Home > Products > Rubber Gasket Sheeting > Styrene Butadiene Rubber Sheet > 65 Shore A Red Color SBR Rubber Sheet

Products

65 Shore A Red Color SBR Rubber Sheet

65 Shore A Red Color SBR Rubber Sheet

China 65 Shore A Red Color SBR Rubber Sheet manufacturers - Buy ISO 9001 certified Styrene Butadiene Rubber Sheet

Content

65 Shore A Red Color SBR Rubber Sheet - 1700

65 shore A red color SBR rubber sheet is a blend of natural rubber and styrene butadiene rubber (SBR), it is able to endure physically abrasive conditions, this red color SBR rubber sheet material is overall harder and denser thanks to the SBR used in it. This is also a waterproof rubber sheet as it can be used in applications involving hot and cold water. However, 65 shore A red color SBR rubber sheet is not recommended for applications that may involve excessive oils or outdoor weather conditions. It is mostly meant to physical industrial applications. The main attraction of these hard rubber sheets is their red color. Some consumers take aesthetic value into consideration for their projects, and we aim to offer rubber roll material that is excellent both in a functional sense as well as an aesthetic sense. Keep in mind this 65 shore A red color SBR rubber shee does have slight color variations from roll to roll.


65 Shore A Red Color SBR Rubber Sheets


Application of Red SBR Rubber Sheet

65 shore A red color SBR rubber sheets are used as skit board sheets, bride bearing pads, shot plasting sheets, high tensile tangum sheets, commercial sheet with or without cotton or nylon insertion etc. 65 shore A red color SBR rubber sheet also has excellent oil resistance, and good resistance to acids, alkalis and salts. SBR rubber is not recommended for use in area where it could come in contact with oils and hydrocarbons. And red color SBR rubber sheet is a general-purpose gasket material for air, hot and cold water, saturated steam and exterior service.

Properties For SBR Rubber Sheet

Style No SBR Color Density g/cm3) Hardness (Shore A) Tensile Strength (Mpa) Elongation at break Compression Set Working Tem (°C))
1700 Red 1.5 65 ≥ 3 ≥ 260% 50% at 22hrs @70°C -10 - +70
1710 Black 1.36 60 ≥ 5 ≥ 300% 50% at 22hrs @70°C -10 - +70
1720 Black 1.5 70 ≥ 3.5 ≥ 250% 60 at 22hrs @70°C -30 - +70
1730 Black 1.6 70 ≥ 3 ≥ 200% 65% at 22hrs @70°C -10 - +70
1740
Off White 1.1 40 ≥ 19 ≥ 600% 30% at 22hrs @70°C -50 - +70
1750 Off White 1.2 50 ≥ 17 ≥ 500% 30% at 22hrs @70°C -50 - +70


ASTM D412 (Test method for Elongation at break), ASTM D395B (Test method for Compression Set), ASTM D412 (Test method for Tensile Strength), ASTM D2240 (Test method for Hardness), ASTM D297 (Test method for Density)