Home
>
Products > High Performance Plastics > Bearing Wear Strip Tape > Phenolic Resin with Fabric Wear Strip
Products
- Flange Insulation Gasket Kits
- Industrial Sealing Gaskets
- Compression Gasket Sheet Materials
- Compression Gland Packing
- Rubber Gaskets and O-rings
- Rubber Gasket Sheeting
- High Performance Plastics
- Expanded PTFE Products
- Sealing Machine Equipment
- Sealing Hand Tools
- Sealing Raw Materials
- Refractory Insulation Materials
Phenolic Resin with Fabric Wear Strip
Phenolic Resin with Fabric Wear Strip is designed to provide an extremely effective, hard wearing, and easy-to-use bearing solution for reciprocating, oscillating.
Content
Phenolic Resin with Fabric Wear Strip - T400
Phenolic resin with fabric wear strip is made of phenolic resion bonded with cotton fabric or polyester fabric, and it is designed to be extremely robust and carry very heavy sideloads up to 270 M/mm. Phenolic resin with fabric wear strip also offers very good thermal stability and low water absorbtion. The cotton fabric is typically used in diameters below 300mm, and polyester fabric reinforcd phenolic resin wear strip tape is more commonly used for larger sizes and may be supplied in strip form. And our phenolic resin with fabric wear strips are supplied with chamfers on all sides to allow for better fit and service life.Main Features of Phenolic Resin with Fabric Wear Strip
Diameter Range: Rolls up to length 5500.00 mm, rings up to Ø 500.00mm.Materials: Cotton fabric or polyester fabric reinforced phenolic resin.
Temperature: -40ºC to 120ºC.
Radial Load Strength (N/mm²): 270 N/mm² (Ultimate)
120 N/mm² at 25 Deg C
60 N/mm² at 60 Deg C
Fluids: Hydraulic fluids (Mineral Oil based )
Advantages of Phenolic Resin with Fabric Wear Strip
Phenolic resin with fabric wear strip has very good wear resistance and long life, it avoids contact between metals. It has low compression deformation and vibration absorbing. Phenolic resin with fabric wear strip has minimal water absorption, and the groove is simple and easy to install, low maintenance cost.
Typical properties of Phenolic Resin with Fabric Wear Strip
|
Properties |
Test Methods |
Typical Value |
Test Unit |
| Specific Gravity |
ASTM D792 |
1.35 |
g/cm3 |
| Hardness | ASTM D785 | 79 |
Rockwell E |
|
Tensile Strength |
ASTM D638 |
65 | Mpa |
| Tensile Modulus |
DIN D638 |
470 |
Kpsi |
| Compressive Strength | ASTM D695 | 35000 |
Psi |
|
Flexural Modulus |
ASTM D790 |
280 | Kpsi |
| Water Absorption | ASTM D570 | 0.1 |
% |
| Working temperature | - | -40 to 120 | °C |
Related Category
Related Products